Search Results

Standard

Terminals: Lug and Splice, Crimp Style, Aluminum, for Aluminum Aircraft Wire

2024-04-25

WIP

AS70991D

This specification covers crimp-style aluminum lug terminals and conductor splices for aluminum aircraft wire. Lug terminals and conductor splices are hereafter called “terminals.”

Standard

SHIELD TERMINATION, SOLDER STYLE, INSULATED, HEAT-SHRINKABLE, ENVIRONMENT RESISTANT WITH PRE INSTALLED LEADS FOR CABLES HAVING TIN OR SILVER PLATED SHIELDS (CLASS I)

2024-04-25

WIP

AS83519/2B

SCOPE IS UNAVAILABLE.

Standard

SHIELD TERMINATION, SOLDER STYLE, INSULATED, HEAT-SHRINKABLE, ENVIRONMENT RESISTANT FOR CABLES HAVING TIN OR SILVER PLATED SHIELDS (CLASS I)

2024-04-25

WIP

AS83519/1C

SCOPE IS UNAVAILABLE.

Standard

Titanium Alloy Welding Wire, 5Al - 2.5Sn

2024-04-25

CURRENT

AMS4953J

This specification covers a titanium alloy in the form of welding wire (see 8.5).

Standard

Free Motion Headform Impact Tests of Heavy Truck Cab Interiors

2024-04-25

WIP

J2424

This SAE Recommended Practice describes the test procedures for conducting free motion headform testing of heavy truck cab interior surfaces and components. A description of the test set-up, instrumentation, impact configuration, target locations, and data reduction is included.

Standard

Titanium Alloy Bars, Forgings, and Flash-Welded Rings, 5Al - 2.5V - 4Sn - 1Co - 0.8Fe Annealed

2024-04-25

CURRENT

AMS6903

This specification covers a titanium alloy in the form of bars, forgings, and flash-welded rings up through 12.000 inches (304.80 mm), inclusive, in diameter or least distance between parallel sides, and stock of any size for forging or flash-welded rings. Bars, forgings, and flash-welded rings with a nominal thickness of 3.000 inches (79.20 mm) or greater shall have a maximum cross-sectional area of 113 square inches (729 cm2) (see 8.5).

Standard

Titanium Alloy Bars, Forgings and Forging Stock, 6.0Al - 6.0V - 2.0Sn, Solution Heat Treated and Aged

2024-04-25

CURRENT

AMS6935D

This specification covers a titanium alloy in the form of bars up through 4.000 inches (101.60 mm) in nominal diameter or least distance between parallel sides, inclusive, forgings of thickness up through 4.000 inches (101.60 mm), inclusive, with bars and forgings having a maximum cross-sectional area of 32 square inches (204.46 cm2), and stock for forging of any size (see 8.6).

Standard

Low Voltage Battery Cable

2024-04-25

WIP

J1127

This SAE Standard covers low voltage battery cable intended for use at a nominal system voltage of 60 VDC (25 VAC) or less in surface vehicle electrical systems. The tests are intended to qualify cables for normal applications with limited exposure to fluids and physical abuse.

Standard

Low Voltage Primary Cable

2024-04-25

WIP

J1128

This SAE Standard covers low voltage primary cable intended for use at a nominal system voltage of 60 VDC (25 VAC) or less in surface vehicle electrical systems. The tests are intended to qualify cables for normal applications with limited exposure to fluids and physical abuse.

Standard

Splice, Electric, Crimp, Copper, Environment Resistant

2024-04-25

WIP

AS81824F

The AS81824 specification covers environment resistant, permanent crimp type, splices having heat shrinkable insulating sleeve and meltable environmental seals or heatless sealing sleeves. The splices may be used with tin, nickel, and silver-plated conductors in applications where the total temperature of the splice application does not exceed 200 °C or as specified in the detail specification.

Standard

Minimum consensus level of arterial blood oxygen saturation (SaO2) at different exposure altitudes, with partial time limitation, for cockpit-crew, cabin- crew and passengers

2024-04-24

WIP

AIR8915

Tables, references and test reports

Standard

Clamp - Tube Support, Spring Clips and PTFE Cushion, Procurement Specification for

2024-04-24

CURRENT

MA3399A

This procurement specification covers the requirements for metal tube support clamps comprising of two spring clips made of corrosion and heat resistant steel and the associated PTFE single split cushion that supports the tube. See Figure 1.

Standard

BEARING, BALL, AIRFRAME, ANTI-FRICTION, EXTRA LIGHT DUTY, CORROSION RESISTANT NITROGEN STEEL (CREN)

2024-04-23

CURRENT

AS27646/1B

Standard

Rivets, Blind, Corrosion Resistant Alloy 67Ni - 31Cu Procurement Specification For

2024-04-23

CURRENT

AS7234A

This procurement specification covers tubular, blind rivets fabricated from a corrosion resistant nickel-copper alloy of the type identified under the Unified Numbering System as UNS N04405, and of 52 ksi minimum shear strength for self-plugging style rivets.

Standard

NUT, PLAIN, HEXAGON, CADMIUM PLATED, UNS G87400, 125 KSI MIN

2024-04-23

CURRENT

AS9881C

Standard

Off-Road Self-Propelled Work Machines Operator Enclosure Environment Part 1: Terms and Definitions

2024-04-23

CURRENT

J3078/1_202404

SAE J3078 provides test methods and criteria for the evaluation of the operator enclosure environment in earth-moving machinery as defined in ISO 6165. SAE J3078/1 gives the terms and definitions which are used in other parts of SAE J3078. It is applicable to Off-Road Self-Propelled Work Machines as defined in SAE J1116 and tractors and machinery for agriculture and forestry as defined in ANSI/ASAE S390.

Standard

Rivets, UNS S66286, Steel, Corrosion and Heat Resistant, 80 ksi Shear Strength, Procurement Specification for

2024-04-23

CURRENT

AS7235A

This procurement specification covers solid rivets and hollow end rivets made from a corrosion and heat resistant steel of the type identified under the Unified Numbering System as UNS S66286 and of 80 ksi single shear strength at room temperature.

Standard

Rivets, Solid, UNS N04400, Corrosion Resistant 67Ni - 31Cu Procurement Specification for

2024-04-23

CURRENT

AS7233A

This procurement specification covers aircraft-quality solid rivets made from a corrosion resistant nickel-copper alloy of the type identified under the Unified Numbering System as UNS N04400 and of 46 ksi minimum shear strength.

Standard

Male Ferrule, Threadless - Flexible, Fixed Cavity, Self-Bonding, Swaged

2024-04-18

WIP

AS1653D

Scope unavailable.

Standard

TERMINAL JUNCTION SYSTEM, RACK ASSEMBLY, TRACK FEEDTHRU TYPE, LIGHT WEIGHT, SERIES I

2024-04-18

WIP

AS81714/14B

SCOPE IS NOT AVAILABLE.